Blog
Lexmark Printer WiFi Setup Guide (Windows, Mac & Mobile)
Connecting a Lexmark printer to WiFi lets you print wirelessly from computers, phones, and other devices without using a USB cable. However, wireless setup can become confusing when the printer cannot find the network, the WiFi password changes, or your computer shows the printer as offline.
The exact menu names can vary between Lexmark models, but the overall setup process is similar. Your printer needs to connect to the correct wireless network, and the device sending the print job must be able to communicate with that printer.
This guide explains how to set up a Lexmark printer on WiFi and troubleshoot the most common connection problems on Windows, Mac, iPhone, and Android.
Quick Fix: How Do You Connect a Lexmark Printer to WiFi?
Before starting, make sure you have:
Your WiFi network name
Your WiFi password
A powered-on Lexmark printer
A computer or mobile device connected to the same network
The correct Lexmark printer model
The Solution:
Use the printer’s wireless or network settings to select your WiFi network and enter its password. Once the printer connects successfully, add it to Windows, Mac, iPhone, or Android and print a test page.
Table of Contents
- 1. Prepare Your Lexmark Printer for WiFi Setup
- 2. Connect the Lexmark Printer to WiFi From the Printer Panel
- 3. Make Sure You Select the Correct WiFi Network
- 4. Enter the WiFi password carefully
- 5. Connect a Lexmark printer to WiFi on Windows
- 6. Connect a Lexmark printer to WiFi on Mac
- 7. Connect a Lexmark printer to iPhone
- 8. Connect a Lexmark printer to Android
- 9. Check Whether the Lexmark Printer Is Actually Connected
- 10. Make Sure the Printer and Computer Are on the Same Network
- Lexmark Printer WiFi Not Connecting
- Lexmark Printer Cannot Find WiFi Network
- Lexmark Printer WiFi Keeps Disconnecting
- Lexmark Printer Connected to WiFi but Not Printing
- Lexmark Printer WiFi Setup After Changing Router
- Lexmark Printer WiFi Setup Without USB
- What to Do When Windows Cannot Find the Lexmark Printer
- What to Do When Mac Cannot Find the Lexmark Printer
- Check the Lexmark Printer IP Address
- Restart the Router and Lexmark Printer
- Reset Lexmark Wireless Settings
- Quick Lexmark WiFi Setup Checklist
- Frequently Asked Questions
- Related Guides
- Final Thoughts
1. Prepare Your Lexmark Printer for WiFi Setup
Before connecting the printer, place it reasonably close to your wireless router.
Turn on the Lexmark printer and wait until it finishes starting.
Check the printer display for its current network status.
If the printer was previously connected to another WiFi network, you may need to remove or reset its previous wireless configuration before connecting it to the new network.
Make sure the printer is not showing an active error, such as:
- Paper jam
- Toner error
- Cartridge error
- Open cover
- Network error
Resolve any printer error before beginning wireless setup.
2. Connect the Lexmark Printer to WiFi From the Printer Panel
Many Lexmark models allow wireless setup directly from the printer’s control panel.
The menu names can differ depending on the model, but look for options such as:
- Settings
- Network
- Wireless
- WiFi
- Network Setup
- Wireless Setup
Open the wireless or network settings and search for available networks.
Select your home or office WiFi network.
Enter the wireless password carefully.
Once the password is accepted, wait for the printer to establish the connection.
A successful connection may be indicated by a WiFi icon, connected status, or network information on the display.
3. Make Sure You Select the Correct WiFi Network
If several networks are available, make sure you select the correct one.
This is especially important in offices, apartments, and other areas with many nearby wireless networks.
Do not select:
- A neighbor’s network
- A guest network
- An old network
- A temporary hotspot
Your computer or mobile device should generally be connected to the same network that the printer uses.
If the printer connects successfully but your computer cannot find it, check the network connection on both devices.
4. Enter the WiFi password carefully
An incorrect wireless password is one of the simplest reasons a Lexmark printer fails to connect.
WiFi passwords are case-sensitive.
Check:
- Uppercase letters
- Lowercase letters
- Numbers
- Special characters
- Spaces
If your router password contains unusual characters, carefully re-enter it.
If the printer repeatedly rejects the password even though you believe it is correct, verify the password using another device already connected to the network.
5. Connect a Lexmark printer to WiFi on Windows
Once your Lexmark printer is connected to WiFi, you need to add it to Windows.
Open Windows printer settings and select the option to add a printer.
Windows will search for available printers on the network.
Select your Lexmark printer when it appears.
Follow the setup instructions and allow Windows to complete the installation.
After the printer has been added, open its printer settings and check its status.
It should appear as Ready or Online.
Print a test page to confirm communication.
If Windows cannot find the printer, continue with the troubleshooting steps below.
6. Connect a Lexmark printer to WiFi on Mac
On a Mac, open the system printer settings and choose the option to add a printer.
Your Mac should search for available printers.
Select the Lexmark printer from the available devices.
Confirm the printer information and complete the setup.
Once added, select the printer and send a test page.
If the Lexmark printer does not appear, confirm that both the Mac and printer are connected to the same WiFi network.
Restarting both devices can also help refresh network discovery.
7. Connect a Lexmark printer to iPhone
Printing from an iPhone usually depends on whether the Lexmark printer and iPhone support the required wireless printing technology.
Connect the iPhone to the same WiFi network as the printer.
Open an application containing the document, photo, webpage, or other content you want to print.
Use the app’s sharing or print option when available.
Select the Lexmark printer from the available printers.
Choose the desired print settings and send the document.
If the printer does not appear, verify the WiFi connection on both devices.
Also make sure the printer supports the wireless printing method being used.
8. Connect a Lexmark printer to Android
On Android, connect the phone to the same WiFi network as the Lexmark printer.
Open the document, image, or webpage you want to print.
Use the application’s print option when available.
Select the Lexmark printer from the available devices.
Choose the required settings and send the print job.
If the printer does not appear, check the Android printing service or compatible Lexmark printing software supported by your printer.
Restarting the phone and printer can also refresh printer discovery.
9. Check Whether the Lexmark Printer Is Actually Connected
After WiFi setup, verify that the printer has successfully joined the network.
Look at the printer’s network or wireless status.
Depending on the model, you may be able to view network information such as:
- Network name
- IP address
- Wireless status
- Connection status
If the printer has an IP address and reports that it is connected, the wireless connection is likely active.
The next step is making sure the computer or mobile device can communicate with it.
10. Make Sure the Printer and Computer Are on the Same Network
One of the most common wireless printing problems is putting the printer and computer on different networks.
For example:
- Printer connected to Home WiFi
- Computer connected to Guest WiFi
Both devices may have Internet access, but they may not be able to communicate with each other.
Connect both devices to the same appropriate network and try printing again.
This is especially important when your router provides separate main and guest networks.
Lexmark Printer WiFi Not Connecting
If your Lexmark printer cannot connect to WiFi, start with the basics.
Check that:
- WiFi is enabled on the printer.
- The router is working.
- The password is correct.
- The printer is within reasonable wireless range.
- The selected network is correct.
- The printer is not displaying another error.
Restart the router and printer, then try the wireless setup again.
If the printer previously connected to another network, resetting its wireless settings may be necessary before configuring the new connection.
Lexmark Printer Cannot Find WiFi Network
If your Lexmark printer does not see your WiFi network, check the router and wireless configuration.
Move the printer closer to the router temporarily and search for networks again.
Also check whether the router is using a wireless configuration supported by your printer model.
If other devices can see the network but the Lexmark printer cannot, the issue may be related to compatibility, wireless settings, or the printer’s network configuration.
Lexmark Printer WiFi Keeps Disconnecting
If the printer connects successfully but repeatedly goes offline, investigate the network rather than repeatedly reinstalling the printer.
Possible causes include:
- Weak wireless signal
- Router problems
- Network configuration changes
- Printer firmware or driver issues
- Unstable wireless communication
Move the printer closer to the router and test the connection.
Restart the router and printer.
If the printer continues going offline, see Lexmark Printer Offline? 10 Fast Fixes to Get It Back Online (2026).
Lexmark Printer Connected to WiFi but Not Printing
A successful WiFi connection does not guarantee that the computer can send print jobs correctly.
If the printer shows connected but does not print, check:
- Computer network.
- Printer network.
- Printer status.
- Print queue.
- Printer driver.
- Selected printer.
- Offline mode.
Try printing a test page after clearing the print queue.
For more troubleshooting, see Lexmark Printer Connected But Not Printing? Fix It Fast.
Lexmark Printer WiFi Setup After Changing Router
If you replaced your router, changed the WiFi name, or changed the password, the printer may still contain the old network information.
Reconnect the printer using its wireless setup menu.
Select the new network and enter the new password.
Then remove and re-add the printer on your computer if necessary.
A router change can also cause the printer’s network address to change, so an old printer entry may no longer communicate correctly.
Lexmark Printer WiFi Setup Without USB
Many Lexmark wireless models can be configured directly from the printer’s control panel without using a USB cable.
Open the printer’s wireless or network settings.
Search for available networks and select the correct WiFi network.
Enter the password and wait for the connection to complete.
Once connected, add the printer from your computer or mobile device.
If your specific model requires another setup method, follow the instructions provided for that model.
What to Do When Windows Cannot Find the Lexmark Printer
If the printer is connected to WiFi but Windows cannot find it, check the following:
- The printer is powered on.
- The printer shows connected.
- Windows uses the same network.
- Guest WiFi is not being used.
- The printer is not offline.
- The printer driver is installed.
- The printer’s network information is correct.
Restart both the printer and computer.
If Windows still cannot find the printer, remove any old Lexmark printer entries and add the printer again.
If the driver is unavailable, see Lexmark Printer Driver Unavailable? Fix Driver Problems Fast.
What to Do When Mac Cannot Find the Lexmark Printer
If your Mac does not detect the Lexmark printer, first confirm that both devices use the same WiFi network.
Restart the printer and Mac.
Then check the Mac’s printer settings and try adding the printer again.
If an old Lexmark printer entry exists, remove it and add the current printer.
Also verify that the printer is actually connected to WiFi rather than simply powered on.
Check the Lexmark Printer IP Address
A network printer communicates with computers using network information, including an IP address.
If the printer’s IP address changes, a computer may continue trying to use an old configuration.
Check the printer’s network information and compare it with the printer entry on your computer.
If the computer is using outdated network information, removing and re-adding the printer can help.
This is particularly useful after restarting or replacing a router.
Restart the Router and Lexmark Printer
When wireless printing stops unexpectedly, restarting the network equipment can restore communication.
A simple sequence is:
- Turn off the Lexmark printer.
- Restart the router.
- Wait for WiFi to become available.
- Turn the printer back on.
- Wait for it to reconnect.
- Check the printer status.
- Test printing.
If the problem persists, check whether the printer is actually connected to the correct network.
Reset Lexmark Wireless Settings
If the printer has outdated wireless information or repeatedly fails to connect, resetting its network settings may help.
The exact procedure varies by Lexmark model.
Look for network or wireless reset options in the printer’s settings.
After resetting the network configuration, reconnect the printer to your WiFi network.
Be aware that resetting network settings can remove the printer’s existing wireless configuration, so you will need to set it up again.
Quick Lexmark WiFi Setup Checklist
Before finishing setup, confirm:
- Printer is powered on.
- WiFi is enabled.
- Correct network is selected.
- Correct WiFi password is entered.
- Printer shows connected status.
- Computer is on the same network.
- Phone is on the same network when printing from mobile.
- Printer is not offline.
- Correct printer is selected.
- Printer driver is installed where required.
- Test page prints successfully.
Frequently Asked Questions
How do I connect my Lexmark printer to WiFi?
Open the printer’s network or wireless settings, search for your WiFi network, select it, and enter the correct password. After connecting, add the printer to your computer or mobile device.
Why is my Lexmark printer not connecting to WiFi?
Check the WiFi password, network selection, router, printer distance, and printer network settings.
If the printer was previously connected to another network, reset or reconfigure its wireless settings.
Why can’t my computer find my Lexmark WiFi printer?
The computer and printer may be connected to different networks. Confirm that both use the same WiFi network and that the printer is online.
Can I connect my Lexmark printer to WiFi without a USB cable?
Many wireless Lexmark models can connect directly through their built-in wireless setup menu. The exact procedure depends on the printer model.
Why did my Lexmark printer go offline after changing my WiFi password?
The printer may still be configured with the old password. Reconnect it to the WiFi network using the new password.
Why is my Lexmark printer connected to WiFi but not printing?
The printer can be connected to WiFi while the computer has an incorrect printer entry, a stuck queue, a driver problem, or an offline setting.
Check the printer status, queue, driver, and network configuration.
How do I connect my Lexmark printer to an iPhone?
Connect the iPhone and printer to the same WiFi network, open the content you want to print, choose the available print option, and select the Lexmark printer if it is supported and detected.
Related Guides
- Lexmark Printer Not Printing? 15 Proven Fixes That Actually Work (2026)
- Lexmark Printer Offline? 10 Fast Fixes to Get It Back Online (2026)
- Lexmark Printer Driver Unavailable? Fix Driver Problems Fast
- Lexmark Printer Connected But Not Printing? Fix It Fast
- Lexmark Printer in Error State? Quick Fix Guide
- Lexmark Printer Print Queue Stuck? Clear Jobs & Fix Spooler
Final Thoughts
Setting up a Lexmark printer on WiFi is usually straightforward once the printer and device are connected to the correct network.
Start by connecting the printer through its wireless settings, selecting the correct network, and entering the WiFi password. Then add the printer to Windows, Mac, or your mobile device and print a test page.
If the printer cannot be found, check that both devices use the same network. If it repeatedly goes offline, investigate the WiFi connection, router, printer network settings, and driver.
A successful wireless setup should leave the Lexmark printer connected, visible to your device, and ready to accept print jobs without a USB cable.
